Zhermack SQM 25 N/SN, User Manual

Page: 124 / 212

124 of 212
MAINTENANCE AND USE MANUAL
EN
SQM 25 N/SN - SAB 1000 G
6.5
STARTING UP THE SQM 25 N
Figure
1
Fig. 1: Position the machine correctly in the
designated area, observing the instructions in
section 6.3.1.
9
10
Figure
2
Fig. 2: Connect the water inlet hose (10) to the
connector on the rear of the model trimmer (9); insert
the relative gaskets at the hose connection point (10).
Then connect the other end of the water feed hose (10)
to a tap.
11
Figure
3
Fig. 3: Connect the water discharge hose to the
connector (11) on the right-hand side of the machine.
To ensure proper operation it is good practice to place
the other end of the hose in a sink/basin or other
recipient suitable for collection of the plaster residues.
7
Figure
4
Fig. 4: Insert the power lead plug (7) into a mains
socket, observing the instructions in section 6.4.
Failure to observe any of the above machine installation instructions may lead to
malfunctions and render the warranty null and void.