32
4.
Configure system parameters.
a.
Click
System Configuration
. The System Configuration
interface appears.
b.
In the Server Configtab, select the management mode based
on the actual networking conditions. Normally, set other system
parameters to defaults.
c.
After configuration, click
OK
.Changing the management
mode will restart the device.
5.
Configure storage parameters.
a.
Click
Storage Configuration
. The Storage Configuration
interface appears.
b.
Building an array
i.
In the Build Array box under the Array tab, enter the array
name, select the array type, and idle slots;
ii.
Click
Create
. The newly created array is shown on the
array list.
