2
on in order to minimize the impulse current produced during the
power-on process.
WARNING!
The hard disk can be hot-plugged only when no data is read
or written. The indicator of hard disk is not blinking when no data is
processed.
Wear anti-static gloves when installing a hard disk.
Insert hard disks into the slots of a running device at an interval of
at least six seconds.
Install a hard disk into the NVR308-48/24-IN as follows:
1.
Fix the hard disk with screws to the handle bar on the correct
side.
2.
Press the buckles on both sides of the front panel and remove the
panel. Note that the front panel is connected to the device body
through an adapter cable and safety rope. Turn over the removed
front panel and place it on the chassis.
