06
07
4. Turn the main switch to “start”, loose it once the engine start.
3. Turn the throttle to 1/3 of Min——Max (as Pic 3)
(Pic 3)
(Pic 4)
SUGGESTIONS:
■
1.Redundant operation with the starter will run out of the battery. Max time for running the engine is
5seconds. Please restart the engine after 10s.
■
2.Once the engine start, DO NOT RESTART the engine.
■
3.Check the battery is connected firmly and sufficient; if the engine is not in idle running,
USE HAND STARTING DEVICE TO START THE ENGINE
If the electric starter failed, use the hand starting device
Pull out the rope slowly, make the starter gear meshing, then pull it out with a sudden force when you think it’s
ok. (Step on the pump) (As Pic 5)
(Pic 5)
(Pic 6)
WARNING: DO NOT RUN the engine when you open the cap of the hand
starting device, otherwise it will be serious injured)
www.zj-woq.cn
Security， guaranteed with my presence！
Model
Nozzle diameter
（
mm
）
Max dia
Min dia
BJ15A
25mm
16mm
BJ15G
25mm
16mm
BJ20A
28mm
16mm
BJ20A-2
22mm
13mm
1. Pull down the handle to open the oil switch (as Pic1)
2. Pull out the choke switch, to close position (as Pic2), return it after normal running)
(Pic 1)
STARTING THE ENGINE
PLACE THE PUMP
1. The pump should be placed on the ground near water, easy to carry and operate
2. Connect the suction hose and fire hose safety. Put the other head of the suction hose to the water. (Suction
hose must be with filters and put in baskets)
3. Water will be spray out from the hose nozzle. Recommend to use the right nozzle size.
STARTING THE ENGINE
(Pic 2)
