background image

 MMC-343 Rev - 09/11

Page 3

 MMC-343 Rev - 09/11

MMC-343 Station Expander User Instructions

Station Expander User Instructions

Table of Contents

1

Features ............................................................................................................... 4

2

Required Parts ..................................................................................................... 4

3

Location ............................................................................................................... 4

4

Station Expander Power ...................................................................................... 5

5

Harnesses ............................................................................................................ 5

6

Tools For Installation............................................................................................ 6

6.1

Required .............................................................................................................................. 6

6.2

Optional ............................................................................................................................... 6

7

Installation ........................................................................................................... 7

7.1

Station Expander ................................................................................................................. 7

7.2

Power Cable ........................................................................................................................ 8

7.3

Control Head Harnesses...................................................................................................... 8

7.4

Engine Stop Switch ............................................................................................................. 8

7.5

Control Heads...................................................................................................................... 9

8

Set Up Procedures ............................................................................................... 9

8.1

Station Expander Components Used In Set Up................................................................... 9

8.2

Station Expander Display LED ........................................................................................... 10

8.3

Push Buttons...................................................................................................................... 10

9

Activating Set Up Mode and Storing a Value..................................................... 11

10

Set Up Functions & Values................................................................................. 12

10.1 A0 - Station Expander Identification.................................................................................. 13

10.2 H0 - Diagnostic .................................................................................................................. 13

10.3 H1 - Erase EPROM ............................................................................................................. 14

11

Dock Trials ......................................................................................................... 14

11.1 Control Head (Engines Stopped) ....................................................................................... 14

11.2 Engine Stop Switches Test (Engines Running).................................................................. 14

12

Periodic Checks and Maintenance .................................................................... 15

12.1 Station Expander ............................................................................................................... 15

12.2 Control Head...................................................................................................................... 15

13

Parts List ............................................................................................................ 15

13.1 Control Heads.................................................................................................................... 15

13.2 Cable (Electric) .................................................................................................................. 16

13.3 Wire Harness (Plug)........................................................................................................... 16

13.3 Wire Harness (Plug)........................................................................................................... 16

13.4 Test Unit ............................................................................................................................ 16

ZF Marine Electronics

12125 Harbour Reach Dr Ste B

Mukilteo, WA  98275

P - 425-583-1900

F - 425-493-1569

www.zf.com

Summary of Contents for MMC-343















Reviews: