Page 12
MMC-343 Rev - 09/11
Figure ENG-283-10: Display Normal Operating Condition
Figure ENG-283-11: Display Function Menu Activated
A The Display is in Normal Operating condition with red running center dash lines.
B Depressing either the Up or Down Arrow Push Button will activate the Function Menu. (refer to
Figure ENG-283-11: Display Function Menu Activated)
C Depressing either the Up or Down Arrow Push Button will scroll through the Function Menu one
at a time.
Figure ENG-283-12: Display with Set up Activated
D Once the desired Function Code is visible on the Display,
depressing
and
holding
the Left and
Right Arrow Push Buttons at the same time will activate Set Up. The left two Display pads will
begin to blink, indicating that the value is ready to be changed. Refer to Figure ENG-283-12:
E Depressing either the Up or Down arrow push buttons will change the Value of the Function.
Holding down either the Up or Down arrow push buttons will scroll quickly through the values.
F When the value required is displayed, depress and hold the Right and Left Arrow push buttons
until the Display Function Code stops blinking and becomes solid. The new Value is now set into
memory.
G Depressing either the Up or Down arrow push buttons will now scroll through the Function
Codes.
10
Set Up Functions & Values
The following table lists the various Function Codes, the Function’s Name, Default Value and Range.
Each Function will be explained in one of the following Sections.
Table ENG-282-1: Functions List
Function
Code
Function Name
Default
Value
Value Range or Options
STATION EXPANDER FUNCTIONS
A0
Station Expander Identification
01
01, 02, 03, 04, 05 (Must match Processor Identification set in the
9000 Series / CruiseCommand Processor the Expander is
connected to.)
