Maintenance and Installation Instructions
Edition 11.07.2006
5 of 30
Safety Instructions
•
The use as directed requires the strict observance with the manufacturer’s specifications for
installation, dis- and reassembly, initial operation and maintenance.
•
Every person concerned with installation, disassembly and reassembly, initial operation and
maintenance of the transmission in the user plant must have read and understood the whole
instructions and in particular the safety instructions.
•
Any working method which endangers the safety of the transmission is prohibited.
•
Modifications and changes without the proper permission are affecting the safety of the
transmission and are not allowed.
•
Only original spare parts from ZF or spare parts approved by ZF are allowed to be used. It is
explicitly pointed out to the fact that spare parts and accessories, which were not supplied
by ZF are not checked and approved by us either. We do not accept any liability or admit any
warranty for damages caused by the use of spare parts and accessories which are no
original parts from ZF.
•
The described work is only allowed to be made by authorized, skilled and instructed staff.
•
The proper repair of these ZF-products requires adequately trained specialists. The repairer
is responsible for the training!
•
Keep away aggressive cleaners from your skin, do not drink it or inhale its vapours! Always
wear safety gloves and goggles. If by mistake cleaner was swallowed, call medical aid
immediately!
Strictly observe manufacturer instructions.
•
Do not drain cleaners or transmission oil into the sewerage system or into the soil.
•
Prior to start working on the installed or mounted transmission, the wheels must be blocked.
•
Prior to any work on the installed transmission (e.g. oil change) or its mounted-on parts the
voltage source feeding the motor must always be disconnected resp. switched off.
•
The local regulations for safety and prevention of accidents must be observed!
