Maintenance and Installation Instructions
Edition 11.07.2006
28 of 30
Fill in the transmission oil at GK 20, GK 25 & GK 30
•
Clean magnet on the oil drain plug (Item 03)
and always reattach it with a
new
sealing ring
(Item 04). (See Fig. 13)
Tightening torque:
22 Nm
•
Fill in the transmission oil. For oil quantities and
viscosity classes see Chapter „Initial Operation
/ Maintenance“ Paragraph „Oil Grade“ & „Oil
Capacity“
•
For filling use a suction and pressure injector
(Item 05). This allows an easy and rapid filling
of the transmission with oil.
•
The correct oil level and the correct oil quantity
is achieved when the oil level is at the lower
edge of the oil filler plug, at least when oil
penetrates at the oil filler plug.
•
Attach the oil filler plug (Item 01) with a
new
sealing ring (Item 02).
•
Tightening torque:
22 Nm
Figure 21
Fill in the transmission oil at GK 40 (Possibility 1)
•
Clean magnet on the oil drain plug (Item 03)
and always reattach it with a
new
sealing ring
(Item 04). (See Fig. 14)
Tightening torque:
22 Nm
•
Fill in the transmission oil. For oil quantities and
viscosity classes see Chapter „Initial Operation
/ Maintenance“ Paragraph „Oil Grade“ & „Oil
Capacity“
•
For filling use a funnel with hose. Maximum
outer diameter of the hose is 13 mm.
•
The correct oil level and the correct oil quantity
is achieved when the oil level is at the lower
edge of the oil filler plug, at least when oil
penetrates at the oil filler plug.
•
Attach the oil filler plug (Item 01) with a
new
sealing ring (Item 02).
•
Tightening torque:
22 Nm
Figure 22
01
02
05
