Zezriderz BANDIT X, User Manual

Page: 10 / 23

⑤
Insert buckle
3 ） How to start
Step1.
Press the POWER button on the display for 3 seconds to turn on the display.
*The power of the display will turn off automatically after a few minutes of
inactivity. At this time,the LED lamp is also turned off, so turn it off with
the LED lamp button before you turn it on again.
Step2.
Stance for driving
After tilting the kickstand, find a stable position on the footrest and then hold
the handle grip comfortably. Be careful not to raise your foot on the rear
fender.
* Scooter are regularly with “zero start” when out of factory, users need to kick
ground to start
Ride.
Step3. Acceleration
Acceleration can be performed by using the throttle of the display while driving,
and the deceleration or stop can be performed by holding the brakes on the
handle.
Caution!
Before driving,be sure to check the folding part, the handle part and the part
where the main fixing part of the product is fastened well. And check the
position of the folding part fixing status.
Throttle malfunction caution
Regardless of whether the throttle is operated or not, the motor sensor may
continue to operate,causing malfunctions such as sudden acceleration. In this
case, holding the brake lever to cancel the operation. This phenomenon may
be caused by corrosion of the throttle,immersion of the