7. Circular knife grinding
The circular knife (3), according to the type of operation, shall be ground from time to time.
Blunt knives render the cutting operation more difficult and strain the cutting knife T-120.
7.1. Automatic grinding with patented grinding device S-120
(special accessory)
For this purpose, the Zeybek T-120 knife disposes of a patented grinding system S-120 for simple and
professional grinding of the circular knife directly on the manual device.
7.2. Manual grinding
If the grinding device should not be available, please proceed as follows.
- Sharpen the rotating circular knife (3) from the sharpened side with grinding
stone
7.3. Manual Deburring
- For deburring, apply the grinding stone on the front side of the rotating circular
d
knife until the grinding gri is removed
After each grinding operation, the circular knife must be removed from the manual device. The adhering grinding
residues on the cutting knife and on the
must be removed.
handset
10
OPERATING INSTRUCTIONS ZEYBEK T-120
