15
14
Recall the Records
DATA MANAGEMENT
1
.When the monitor is off, please press and hold “ ” button to enter
the mode for Pair-up the Blood Pressure Monitor with Your Device.
MEASUREMENT
Tips:
A. You can press “ ” button at any time to stop measuring during the
process of measurement.
B. Maximum 60 records .
C. If the measurement result is out of the measurement range (SYS: 60mmHg to
230mmHg; or DIA: 40mmHg to 130mmHg;or Pulse: 40-199 pulse/minute), the
LCD will display “out”.
4.Press “ ” button to power off, otherwise it will turn off within 1 minute.
2.This device will proceed to data transmission after measurement.The Bluetooth
symbol blinks on the LCD indicates data is transmitting.
3.If the data is successfully transmitted, the Bluetooth symbol will light up,and
the will disappear then the device will turn off. If the data transmission fails,
the will disappear then the device will turn off.
2
. Hold and press “ ” button again to show the average value of the latest
three records. If the records are less than 3 groups, it will display the latest
record instead.
3
. Press the “ ” button to rotate the records. The order of the record, date
and time will be displayed alternatively.
The current No. is No. 1.
Ten records in total.
The corresponding
time is 10:00.
The corresponding
date is May 5 .
th
Tips:
You can hold and press “ ” button to turn off the device when the device
is in the memory recall mode.
