Installation
~
10
~
Step3: Drill the holes (diameter: 6mm, depth: at least 30mm).
Step4: Remove dust that may have accumulated from the drill holes.
Step5: Insert the screw anchors into the drill holes using a rubber mallet.
Step6: Screw in the screws until they protrude by 5mm.
Fig. 4-3: Screw in the screws
Step7: Hang the ZeverCom/ZeverCom WiFi on the screws.
Step8: Tighten the screws.
Fig. 4-4: Tighten the screws
