DOC-USR-0070-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
30
6.15
Using MPTS to Combine Multiple Streams
The Z3-SME-01 includes an MPTS (Multiple Program Transport Stream) that combines multiple channels
into a single stream. This can be used by taking two inputs to the encoder and simultaneously
streaming them into one IP stream containing two channels.
(1)
Verify the encoder is connected to a composite and an HDMI video source.
(2)
Open the user interface (See Section 6.3).
(3)
In the “CH1” tab, change the Output Format for your HDMI video source to “MPTS”.
(4)
In the “CH2” tab, change the Output Format for your composite video source to “MPTS”.
(5)
In the “MPTS” tab, set the total MPTS transport rate. This should equal the total transport rate of
all channels being fed into the MPTS plus a 20% margin.
(6)
Set “Destination 1” to “UDP”. ASI is not supported by the Z3-SME-01 hardware.
(7)
Set the “IP Address” and “IP Port” for the destination of the stream. In the pictured example,
“221.1.2.3” and “6000” are used.
Figure 29 MPTS Settings