Zeus Z3-SME-01, User Instructions, Page: 15 / 64

DOC-USR-0070-08
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
15
(14) If the encoder hasn’t already autostarted, click on “start”. You should see the status change to
“RUNNING.” If the encoder is already running, click on “stop” and then “start” to confirm the
encoding occurs with the values you specified.
*Note : If you want to encode 1080p60, you must first change “Operating Mode” at the bottom right
from “Encode Interlaced/Progressive” to “Encode Single CH No Scale.” Note that, in “Encode
Single CH No Scale” mode, only the CH1 tab can be used.
Figure 8 CH1 Tab Configuration – UDP
(2) Change
to UDP
(3) Change to IP
Address of your PC or
multicast address
(1) Change to
“1920x1080” or
“Follow input”
(4) Note “Dest Port”
value
(6) Click “start”
(5) If necessary, click “stop”