DOC-USR-0070-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
17
6.6
Streaming RTP/RTSP
Once you have UDP streaming running, it is relatively simple to change to RTP/RTSP streaming. You will
need to change one setting. To stream using RTP/RTSP, complete the following steps:
(19)
In the CH1 configuration tab, click on “stop” to stop the current encoding session.
(20)
Change “Output Format” from “UDP” to “RTP/RTSP.”
When RTP/RTSP is selected, the encoder will send an RTP stream using the Dest Address and Dest
Port listed in the user interface. If RTSP will be used exclusively, the Dest Address field can be
set to “127.0.0.1” to prevent the RTP stream from being sent.
*Note:
As RTSP operates through port 554, it is advised never to set the Dest Port field to 554
when RTP/RTSP is selected.
(21)
Click on “start” to start the RTP/RTSP encoding session.
Change to “RTP/RTSP”
Figure 11 Channel 1 Configuration Screen – RTP/RTSP