DOC-USR-0070-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
25
6.11
Encoding from Composite In
The Z3-SME-01 also supports encode of video from a Composite source. Composite input can be used in
parallel with the HDMI input. A composite adapter cable, provided with the Z3-SME-01, is needed. To
encode Composite, perform the following steps:
(1)
Find the special composite adapter cable (pictured below). Connect the yellow/red/white cables
to the composite source. The yellow connector connects to the composite output of the video
source, while the red and white connectors connect to the analog audio outputs.
(2)
Connect the special adapter portion to “A/V In” on the back of the encoder.
(3)
Click on the “CH2” tab. If it is not currently present, click on “+” to generate this additional tab
and then click on the tab that was created.
Figure 24 Creating the CH2 Tab
If “CH2” not present,
click on “+” to create it
Figure 22 Composite Cable
Figure 23 Z3-SME-01 Composite Connection
Connect
Composite
here