LOOP 500
14
5.3
Disabling/enabling, deactivating/activating alarm devices
5.3.1.
Disabling and enabling alarm devices
Disabling an alarm device
To disable an alarm device (e.g. No.4), the following keys should be pressed:
OFF
Alarm
device
4
Steps carried out are shown on the display as follows:
A l a r m d e v i c e _ _ 4
O F F
L 2 *
Execution of the command is shown on the display as follows:
D i s a b l e a l a r m d e v i c e 0 0 4
T T T T T T T T T T T T
L 2 *
Disable
- indicates that a Disable operation has been carried out
TTT
- possible customer text (for Alarm device No.4)
Indications
−
the DISABLE LED in the EXT.AUD.ALARM DEVICE field illuminates
−
the DISABLE collective display illuminates
−
if operation of the control panel is disabled again by the key switch, the DISABLE LED will continue to be
actuated
Enabling an alarm device
To enable an alarm device (e.g. No.4), the following keys should be pressed:
ON
Alarm
device
4
Steps carried out are shown on the display as follows:
A l a r m d e v i c e _ _ 4
O N
L 2 *
Execution of the command is shown on the display as follows:
D i s a b l e e n d a l a r m d e v i c e 0 0 4
T T T T T T T T T T T T
L 2 *
Dis. end
- indicates that disabling has been completed
TTT
- possible customer text (for alarm device No.4)
−
the DISABLE collective display only extinguishes when no further Disable is present in the control panel
http://www.firealarmengineers.com
