ZETRON 360, Instruction Manual

Page: 60 / 77

Operation
60 025-9459E
Mute
To mute the receive audio of a Model 360 Remote, press the Mute key. The Mute LED
will illuminate.
The mute function does not time out and does not affect other remotes.
To unmute the receive audio, press the Mute key again. The Mute LED will turn off.
Mute will also cancel if the Transmit key is pressed.
For information on disabling mute for a single remote, see Table 3 on page 32 .
Privacy Mode
Privacy mode allows a user to talk with someone over the air without users at other
remotes hearing the conversation.
Note Privacy mode affects only remotes. It does not provide security
over the radio channel.
To enter privacy mode, press the Privacy key. The Privacy LED will come on. The
Privacy LEDs on all the other remotes (except Supervisor remotes) will blink to indicate
that they cannot control the radio, and their Mute LEDs will illuminate.
The radio can be controlled normally by the user who initiated privacy mode and by users
at Supervisor remotes. Current radio status will continue to be displayed on all remotes.
As long as the system is in privacy mode, users at other remotes (except Supervisor
remotes) will be unable to receive audio or key the radio. If no keys are pressed on the
initiating remote or any supervisor remotes for 60 seconds, privacy mode will time out
and the system will return to normal operation.
To exit privacy mode, press the Privacy key again on the initiating remote or a
Supervisor remote.
Optionally, the system can be configured to enter privacy mode when the handset is
removed from the cradle and/or to exit privacy mode when the handset is replaced.
Privacy can also be disabled for all remotes. These options are set in system
programming.
For information on disabling privacy mode for individual remotes, see Table 3 on page
32 .