ZETRON 360, Instruction Manual

Page: 48 / 77

Programming
48 025-9459E
Menus
This section describes the commands available on the menus.
File Menu
New
This command creates a new configuration with default settings.
Open
Use Open to open an existing configuration file.
Save
Choosing Save will save the current configuration file under its current name.
Save as
This command saves the current configuration file under a different name. This is useful
when you want to base a new configuration on an old one, but still keep the old
configuration file.
Delete
This command deletes a configuration file from the hard disk. The file to be deleted can
be selected from a list of available files.
Print
Use this command to print the current configuration to the device selected in setup. This
can be either a printer port (LPT1 or LPT2) or a file on the hard disk. If a file is chosen as
the output, the configuration information will be printed to a text file called “printme.txt”.
This can be viewed, edited or printed the same as any text file on your system.
Exit
Choosing this command exits the programming software.