ZETRON 360, Instruction Manual

Page: 47 / 77

Programming
47
Programming
The steps in programming a radio interface are:
• Create a new configuration file with default settings, open a saved configuration
file from disk, or read the configuration settings from a radio interface.
• Edit the settings as desired.
• Write the configuration settings to the radio interface.
You may save a configuration file to disk for later use and/or print it out for reference.
Old configuration files may also be deleted using the programming software.
Using the Programming Software

To navigate the software:
1. Use the arrow keys or hot keys (Alt + bolded letter) to select a menu.
2. Use the arrow keys, or keys corresponding to bold letters, to choose a command.
For example, while the File menu is selected, press “S” to choose Save.
3. Press Enter to execute the command.
On-screen instructions will guide you. Context-sensitive help can be accessed by pressing
F1.
Ending the Programming Session
When you have finished programming the radio interface, cycle power on the radio and
radio interface. Cycling power on the radio interface takes it out of programming mode
and puts the new settings into effect.