LLC "ETMS"
Tel./Fax.: +7 (495) 739-39-19, www.zetlab.com
9
Synchronization module ZET 7175 is used for synchronization of sensors time with global
time.
5.
Interface converter ZET 7176
Interface converter ZET 7176 is used to connect the digital sensors of ZET 7152-N-VER.3
to PC via Ethernet interface as well as to configure digital sensors parameters.
6.
Integrated battery
ZET 7152-N-VER.3 has an integrated battery allowing to record the registered signals to
non-volatile memory for further analysis by means of PC. ZET 7152-N-VER.3 data is transmitted
via Ethernet in real-time mode. Battery capacity enables measurements during 18 hours.
Meanings of indicators located at the lid of ZET 7152-N-VER.3 are shown in
Table 1.3 Meanings of indicators
Indicator name
Indicator
color
Indicator state
Event
Battery
Red
On
It is necessary to charge the battery.
Blue
On
Battery is charging.
Green
On
Battery is charged (The indicator is
active only when ZET 7152-N-
VER.3 is switched off).
REC
Orange
On
Data recording to a memory card or
data transfer to industrial PC via
USB / Ethernet.
LAN
Green
On
ZET 7152-N-VER.3 is connected to
PC via Ethernet interface.
Sync
Blue
Flashes
ZET 7152-N-VER.3
synchronization by GPS or PTP.
Error
Red
On
Error.