ZETLab ZET 7152-N-VER.3, User Manual, Page: 20 / 38

LLC "ETMS"
Tel./Fax.: +7 (495) 739-39-19, www.zetlab.com
20
2.6 Configuring sensors included into the scope of ZET 7152-N-VER.3
Before starting to use ZET 7152-N-VER.3, it is necessary to configure corresponding digital
sensors.
Note: primary configuration of ZET 7152-N-VER.3 is performed by the manufacturer.
Please, note that in the field “Node 2 ÷ 63” of “Information” tab there should be set a unique
address of each device of the measuring network. All the devices within the scope of the
seismograph should have unique address – it is an obligatory condition for normal operation of
ZET 7152-N-VER.3. The nodes are set in the range from 3 to 63. Figure 2.9 shows an example of
“Information” tab of digital accelerometer ZET 7152-N with «3» node set.
Figure 2.9 “Information” tab