ZETLab ZET 7152-N-VER.3, User Manual, Page: 17 / 38

LLC "ETMS"
Tel./Fax.: +7 (495) 739-39-19, www.zetlab.com
17
As the connection is established, there will be formed a list of digital sensors connected to
the interface converter ( Figure 2.5 ).
Figure 2.5 Active ZET 7176 and corresponding list of the sensors connected
The left section of the window depicts tree of devices, that are connected to the PC. The first
level depicts interface converters and devices, that are connected to PC. The second level shows
sensors, that are connected to a particular interface converter. To the right from the digital sensor
one can see device address in the measuring network ( Figure 2.6 ).
Figure 2.6 Addresses of the devices in the measuring network
In the case if detailed display mode is enabled, the right section of the window will display
basic parameters of measuring channels.
In order to select a sensor to be configured, double-click its name (more information is
available in “ZETLAB Software. User manual”).