LLC "ETMS"
Tel./Fax.: +7 (495) 739-39-19, www.zetlab.com
21
The devices included into the scope of ZET 7152-N-VER.3 have the following addresses:
Digital accelerometer ZET 7152-N – «3», «4», «5»;
Short-period seismometer ZET 7156 – «7», «8», «9»;
Off-line recorder ZET 7173 – «45», «46»;
Synchronization module ZET 7175 – «47», «48».
Note: short-period seismometer ZET 7156 consists of three channels (by default named as:
«ZET 7156_X», «ZET 7156_Y», «ZET 7156_Z») and has three addresses in the measuring
network. It is possible to configure the seismometer parameters only in the tab of the first channel
«ZET 7156_X». In the case if the first channel device address is changed, the system will
automatically change the addresses of the remaining channels by “1”.
Note: digital accelerometer ZET 7152-N consists of three channels (by default named as:
«ZET 7152_X», «ZET 7152_Y», «ZET 7152_Z») and has three addresses in the measuring
network. It is possible to configure the seismometer parameters only in the tab of the first channel
«ZET 7152_X». In the case if the first channel device address is changed, the system will
automatically change the addresses of the remaining channels by “1”.
Note: off-line recorder ZET 7173 and synchronization module ZET 7175 consist of two
channels and has two addresses in the measuring network (the second channel is not depicted in
the system, but still has one address).