Z8X-UM01 Rev.A
INSTRUCTION MANUAL
Zerun Co., LTD
( No.16 Yaxi Road, Zhixi Town, Jintan District, Changzhou City, 213251 Jiangsu , China )
7
Figure4
To attach the junction box to the photovoltaic panel, thread the foil tab through the openings in the
bottom of the junction box. Make sure the junction box is properly oriented in a horizontal position
before firmly placing the junction box into its final position on the photovoltaic panel. Then, the 1kg
metal weight can be applied to the top of the junction box to ensure adequate adhesive coverage.
If needed, use the spatula to smooth any excess silicon that may have extruded out of the joint. Keep
the photovoltaic module assembly in the horizontal until full cure is obtained.
A full cure requires 24 hours at room temperature before the photovoltaic module can be connected and
tested.
Touching or handling of the foil tabs during the pressing of the box
is not permitted.
Mechanical stressing of foil tabs can cause their destruction
and thereby the malfunction of the panel.
