Zero UAV (Beijing) Intelligent Technology Co., Ltd. 15
2.
Inspect the power supply to the gimbal, if all gimbal indicators light up, successful energizing is indicated.
3.
Check the center of gravity of the camera: it should be stable and centered i.e. when unpowered, move the camera to any
position, it should stay static in its current position after release.
4.
Check that all screws are tightened to avoid instability and shaking.
5.
Check that channel settings on the transmitter are correct.
7.2
AAOPERATIONAL STEPS
1.
Supply power to the gimbal (When using the spark prevention plug it must be inserted at the bottom, otherwise the gimbal
will be in an abnormal power supply state).
2.
Switch on the transmitter
3.
Self-
inspection of gimbal: by hand, rotate the camera in at least one complete circle (360°) along all three axes
, i.e. make
sure it freely and continuously rotates in pitch, roll and yaw (pan) directions.
NOTE: The gimbal must be allowed to carry out its self-inspection every time it switched on to ensure that it functions
correctly.
