ZERO-X Spectre ZXSPT, User Manual

Page: 19 / 24

17
Maintenance
Cleaning:
Avoid exposing your Spectre drone and it’s accessories to dust, sand and moisture
as these can damage the Spectre drone. If the Spectre drone is exposed to dust
or sand, use a soft brush to remove any visible particles.
Rotor Blade replacement:
1. Use the Included screwdriver to remove
the screw on the base of the Rotor Blade.
2. Gently remove the Rotor Blade.
3. Ensure that you are replacing the Rotor Blade with the correct blade as there
are two diferent orientations of blades which are labelled A and B.
If the incorrect blade is used in the incorrect placement the Spectre drone
WILL NOT WORK.
Diferent colour Rotor Blades are used so it is easy to
dentify the front and rear of the Spectre drone when lying. To ensure that it is
easy to ly the Spectre drone make sure that the front and rear blades are
diferent colours.
4. Gently push the replacement Rotor Blade onto the rod ensuring that the screw
hole on the Rotor hole lines up with the hole on the rod.
Replace the screw, being careful not to over
tighten. If the screw will not it into place,
remove the screw and make sure that the
holes on both the Rotor Blade and the rod
are aligned.
A
B