ZERO-X Spectre ZXSPT, User Manual

Page: 12 / 24

10
Launching your Spectre drone
1. After installing a fully charged battery and installing 4 x AA batteries
(AA batteries not included) into the remote control and conducting a complete
check of your surroundings, turn the Power Switch (8) on the Spectre drone
to the ON position.
2.
Once on, the LED lights on the arms of the Spectre drone should lash signalling
no connection to the Remote Control. Place the Spectre drone on lat ground
facing away from you and move back three metres.
3.
With the Left Thumbstick (Acceleration/Yaw) (2) in the lowest (down) position,
power on the remote control. The remote control should beep once to indicate
power up has been successful.
4. To activate the connection between the remote control and the Spectre drone,
move the Left Thumbstick (Acceleration/Yaw) (2) on the Remote Control
to the highest (up) position hold for one second and then return the Left
Thumbstick (Acceleration/Yaw) (2) to the lowest (down) position holding for
another 2 seconds. The remote should beep three times, the lights on the
arms of the Spectre drone should shine solid and the power indicator light
on the Remote Control will shine solid indicating that the connection has
been successful.
Turn on the
power switch on
the bottom.