ZERO-X Spectre ZXSPT, User Manual

Page: 13 / 24

11
Launching your Spectre drone
5.
Calibrate the Spectre drone by holding the Right Thumbstick (Pitch/Roll)
(3) in the bottom right position. This ensures that the Spectre drone stays level
and lies straight. The Lights on the Spectre drone will lash fast while
calibrating. Keep holding the Thumbstick in the bottom right position until
calibration is complete.
If the Spectre drone starts to ly abnormally, it may need to be recalibrated.
To recalibrate the Spectre drone turn the Remote Control and Spectre drone
of, and then restart the Launching Your Spectre Drone process.
Do not approach the drone again until the remote has been
powered of
If for any reason the Spectre drone does not work after following the launching
steps, please check the following.
a) The Spectre drone battery is fully charged, correctly connected and not
damaged.
b)
The batteries in the Remote Control are the same brand, have an equal
amount of charge and have enough charge to power the remote control
correctly (Using an assortment of batteries will afect the performance of the
Remote Control).
c) The connection between the Remote Control and the Spectre drone may not
have been completed correctly. Ensure that when activating the connection,
the Left Thumbstick (Acceleration/Yaw) (2) is moved all the way to the top
and then all the way to the bottom. If this is not completed the connection will
not activate..
Once these elements have been checked turn both the Spectre drone and the
Remote Control of and start the launching process again.