ZERO-X Maverick, User Manual

Page: 8 / 32

08.
3.0 SETTING UP YOUR ZERO-X MAVERICK
3.1 CHARGING THE BATTERY
YOUR ZERO-X DRONE COMES WITH A CERTIFIED ZERO-X USB
AC CHARGING ADAPTER FOR 240v CHARGING OF YOUR DRONE
BATTERY. USE OF A NON ZERO-X CERTIFIED USB AC CHARGING
ADAPTER WILL VOID YOUR WARRANTY AND MAY DAMAGE BOTH
YOUR BATTERY AND DRONE.
Fully unwind the included USB charging cable and plug the USB end into
the included Zero-X Certified USB AC charging adapter. When connected
to a charging source the LED light in the charger will turn off. Connect
the drone battery to the charging cable the light on the USB charging
cable will glow red indicating charging is in process. The light on the USB
charging cable will turn off again once charging is complete. To keep
the battery life as long as possible avoid removing the battery from the
charging cable before charging is complete. If you have just finished flying
your Maverick drone, please allow the battery to cool down for at least 30
minutes before recharging.
1. Remove your battery from your Maverick drone making sure you have
allowed 30 minutes after using the battery to allow the battery to cool
down.
2. Connect the USB charging cable to the Supplied Zero-X AC charger
and connect the Ac charger to a power outlet.
3. Connect your Zero-X Maverick drone battery’s small white connection
to the USB charging cable.
4. The battery will start charging.
5. The Maverick battery may take up to 4 hours to charge.
6. Once charging is complete remove the battery from the charger as
soon as possible. Please do not leave the battery on the charger after
charging is complete.