ZERO-X Maverick, User Manual

Page: 12 / 32

12.
4.0 REMOTE CONTROL
1. Ensure that the remote control is turned off.
2. Remove the battery cover on the rear of the remote by sliding it
downward.
3. Insert 6 AA batteries into the battery hatch on the rear of the
controller.
4. Replace the battery cover on the rear of the controller by sliding it
upward.
Note :
Please ensure the batteries that you are using are all the same brand are
all have full charge when you use them. Using batteries that have varying
levels of charge will affect the controller’s performance.
4.1 INSTALLING A MICRO SD CARD
The Maverick includes a 1080P WiFi camera which is attached to the
underside of the drone.
To record with this camera, it is required that a Micro SD card is inserted
into the camera.
To insert a Micro SD card in the camera please follow the instructions
below.
1. Remove the camera from the camera clip on the underside of the
drone.
2. While facing the cameras screen there is a Micro SD Card slot on the
left side of the drone. Take your Micro SD Card and insert it into the
Micro SD Card slot with the text side of the card facing towards the
screen.
Battery cover
6 X 1.5V AA batteries