09.
3.2
REMOVING AND INSTALLING THE BATTERY
To remove the hydra’s battery please follow the instructions below.
1. Slide and hold the Battery Release latch on the underside of the
drone back towards the power button.
2. While holding the Battery Release latch in the release position lift the
battery out of the battery slot.
TO INSTALL THE HYDRA’S BATTERY.
1. Slot the battery into the slot aligning the batteries connection slot
with the drones copper pins
2. With the batteries contact side locked into position, firmly press
down the battery at the locking end until the Battery Release latch
clicks into position
