17.
been checked turn both the Hydra and the Remote Control off and
start the launching process again.
4.3
ONE BUTTON TAKE OFF/LANDING
The one button take off and landing button allows you to easily get your
drone off the ground and land once the Hydra is paired and the motors
are unlocked.
TO TAKE OFF
Follow the powering up and pairing instructions in this manual. Once the
drone is paired to the controller press and the motors are unlocked the
one button take off/ land button, and the drone will take off and hover at
shoulder height.
TO LAND
While flying to bring the drone down, press the one button take off/land
button. The drone will then descend and land.
EMERGENCY LANDING
If you need to bring the drone down in an emergency, while flying, hold
the one button take off/land button. The motors will stop completely and
the Hydra will fall to the ground.
PLEASE NOTE:
When using any land function, make sure that there are
no obstacles, people or animals under the drone.
Do not use the emergency stop function unless it is an emergency
situation as this will cause the motors to lock, and the drone to free fall.
4.4
ALTITUDE HOLD
Altitude hold works while you are flying the Hydra to help the drone hover
and maintain a constant height making aerial photography easy.
To see altitude hold working, allow the left thumb stick to fall back to its
default middle position while flying, and the Hydra will balance itself to
hold its altitude.
