Zero Motorcycles 2016 ZERO DS Owner'S Manual Download

Page: 85 / 146

General Maintenance

6.13

Rear brake pads

WARNING!

With new brake systems or just new pads, the

first few braking applications will result in very little braking
power. Gently use the brakes a few times at low speeds
(less than 25 mph [40 km/h]) to develop proper braking
friction.

Suspension

Front

•

For maintenance, see Maintenance Schedule on

page 6.2

•

To adjust the fork, see Suspension Adjustment on

page 4.9

Rear
WARNING!

The shock absorber assembly contains highly

pressurized gas.

•

Do not attempt to tamper with or open the cylinder or
shock.

•

Do not subject the shock to high temperature or open
flame.

WARNING

! Doing either of the above actions can cause

the cylinder or shock to explode causing personal injury or
death.

For maintenance, see Maintenance Schedule on

page 6.2

To adjust the fork, see Suspension Adjustment on

page 4.9

Zero Owner's Manual (S and DS).book Page 13 Friday, October 30, 2015 11:13 AM

Summary of Contents for 2016 ZERO DS



















































































































































Search results

Summary of Contents for 2016 ZERO DS

Reviews:

Related manuals for 2016 ZERO DS

Brands by name

Popular brands

Zero Motorcycles 2016 ZERO DS, Owner'S Manual

Search results

Summary of Contents for 2016 ZERO DS

Reviews:

Related manuals for 2016 ZERO DS

Brands by name

Popular brands