Zero Motorcycles 2016 ZERO DS Owner'S Manual Download

Page: 73 / 146

Maintaining Your Motorcycle

6.1

Maintaining Your Motorcycle

Owner’s Responsibilities

Listed below are the responsibilities afforded to the owner:

•

This owner’s manual should be considered a
permanent part of this motorcycle and should remain
with it even if the motorcycle is subsequently sold.

•

Perform routine care and maintenance of your electric
motorcycle as detailed in this owner’s manual.

•

Use only Zero approved parts and Zero Motorcycles
accessories.

•

The operator is responsible for learning and obeying all
country, federal, state, and local laws governing the
operations of an electric motorcycle.

•

Always wear a regionally approved helmet, goggles,
appropriate boots, and all other appropriate safety
equipment when operating an electric motorcycle.

Zero Owner's Manual (S and DS).book Page 1 Friday, October 30, 2015 11:13 AM

Summary of Contents for 2016 ZERO DS



















































































































































Search results

Summary of Contents for 2016 ZERO DS

Reviews:

Related manuals for 2016 ZERO DS

Brands by name

Popular brands

Zero Motorcycles 2016 ZERO DS, Owner'S Manual

Search results

Summary of Contents for 2016 ZERO DS

Reviews:

Related manuals for 2016 ZERO DS

Brands by name

Popular brands