Z 45/75-90/110
Testing and verification
63
www.zepro.com
10.2
Dynamic load test.
10.2.1
Test with max. load
Place a test load on the platform according to the table (for the respective tail lift model/lifting capacity).
Check that the lift operates correctly in the normal range of movement, i.e. up, down, tilting at ground level
and tilting at vehicle floor level.
10.2.2
Test with overload
Place a test load on the platform according to the table (for the respective tail lift model/lifting capacity).
The test load should be 1.25 x the lift model’s max. load. Verify that the tail lift cannot lift the load when the
up function is switched on (it may however be possible to tilt up the load).
10.2.3
Dynamic load (Test load 1.0 x tail lift loading capacity). For tail lifts with
load cen tre of 600 mm
Capacity
Load 500 kg
Load 1000 kg
Distance on platform (L)
450 kg
600 mm
-
500 kg
600 mm
-
700 kg
800 mm
-
750 kg
900 mm
-
1000 kg
1200 mm
600 mm
1500 kg
1800 mm
900 mm
2000 kg
-
1200 mm
2500 kg
-
1500 mm
Image 81. Testing and verification
Max 2º
Max. 15 mm
B
D
C
A
B
D
C
A
Vehicle
floor level
Deformation
Operation
Summary of Contents for Z 45-110
Page 2: ......