Z 45/75-90/110
Installation
35
www.zepro.com
5. After adjustment, tighten the locking nut. To en-
sure that the locking nut is fixed in the set posi
-
tion, it is recommended it be locked using Loctite
243 or equivalent.
Tightening torque: 80 Nm.
m
WARNING!
After finishing adjustment, make sure the
distance between the adjusting collar and the
end of the thread is no more than 30 mm.
6. Fit the cylinder boots.
Max. 30 mm
A
Image 50.
A
fter finishing the adjustment, make
sure the distance between the adjusting collar and
the end of the thread is no more than 30 mm.
Lift model
A
45/75-90
73 ±5
45/75-110
156 ±5
4.14
Transport lock
For all CE marked lifts with 1000 kg lifting capacity
or more, platforms are supplied without mechanical
locks. Otherwise, the transport lock for steel plat-
forms is fitted on the right-hand side.
Electric hose rupture valves serve as locks for the
platform. The lock opens automatically if the down
function is actuated from the controller. The valves
are check valves that let fluid into the cylinders but
not out before they are actuated by the flow from the
lowering valve. The platform is therefore hydrauli-
cally locked during transport.
Image 51.
Installing boots.
Summary of Contents for Z 45-110
Page 2: ......