Z/ZL 1500/2000-135/155/175
Connection
37
www.zepro.com
6
Connection
6.1
Cable grommet
6.1.1 Before cable connection
Remove the cable grommet’s protective cover and the five screws to allow cable routing through the grommet.
1. Disconnect the cable grommet’s protective cover, which is secured with three screws; see Figure 57
.
2.
Loosen the five screws on the cable grommet, see
Figure 59. Cables can now be installed/removed/ad-
justed in the grommet. When installing the cable, it should be done together with existing cabling using
cable ties. Make sure the cable is long enough to allow the control card / relay card to be folded in/out.
Strip back sheathing on cables that connect to the control card / relay card by 350 mm; see Figure 58.
Figure 57.
Fasten the cable grommet’s pro
-
tective cover with three screws
350 mm.
Figure 58.
Strip back sheathing on cables that connect to the control card / relay card by 350 mm.
Figure 59.
Cable grommet's five screws
Summary of Contents for Z 1500-135
Page 2: ......
