13
18
5. Power Jack: Press it snug to the board. Double check that it is sitting square to the front edge of
the board and flush to the top of the board before you solder it. Tack one pin of the jack into
place on the board while you hold it in (19). Once it’s tacked in place, finish soldering it to the
board (20).
19
20
6. Audio Jack: Install the audio jack at J1. Once again, use the tack-in method to install this jack
(21). Once the jack is held in place, finish soldering the rest of the pins (22). Remember to re-
flow the tacked in pin.
21
22
23
