26
USING YOUR NOISETTE
Figure 4: Noisette Features and Parts
1. DC POWER JACK: An option for applying power to your Noisette is to use a 9 volt, center
negative power supply. A typical guitar pedal power supply will work. 50mA minimum.
2. AUDIO OUT JACK: This jack can be used with headphones or as a line output.
WARNING
: MAKE SURE THE VOLUME KNOB IS FULLY COUNTERCLOCKWISE
(VOLUME VERY LOW) BEFORE USING THIS JACK. LOUD AUDIO SIGNALS MAY
CAUSE HEARING DAMAGE.
Please make sure the HEADPHONE/SPEAKER HEADER is in the headphone position, otherwise
hearing or headphone damage may occur. If a line level output is desired set the VOLUME
KNOB at about the 10 o’clock position and adjust it from there for the desired volume level.
3. POWER SWITCH: When the switch is pressed in the Noisette is on, when the switch is out the
Noisette is off.
4. SHAPE KNOB: Controls the Noisette’s waveform shape. Pan between square wave (fully counter-
clockwise) and sine wave (fully clockwise).
