MOUNTING HEIGHTS
The range hood must be installed at a mini-
mum height of 24 inches (61cm) from the
cooking surface. If a connecting duct work
composed of two parts is used, the upper
part must be placed outside the lower part.
Do not connect the range hood duct to the
same duct used to exhaust hot air or fumes
from another appliance. Before proceeding
with the assembly instructions remove the
decorative mesh filters so that the range hood
is easier to handle.
MOUNTING TO THE WALL
1. Place the paper template included with
your hood on the wall to determine where
to add the screws for mounting the hood.
Make sure the bottom of the template
aligns with the bottom of where
the hood will be located. See Fig. 9
2. Lift the hood onto the screws and
adjust to make sure the hood is
level.
3. When the hood has been adjusted
tighten the screws to secure the
hood in place.
NOTE:
Screws must be fastened into
wooden studs so wood blocking may
be necessary. If using wall anchors
make sure to check your local codes
for suitability and type of anchors
to use.
NOTE1
: For the various installations use screws and screw anchors suited to the
type of wall (minimum screw size: 1/4" diameter x 2-3/4" length).
Min 24" - Max 36"
36"
Installation - Mounting the Range Hood
- 15 -
