15
Hood is designed for installation under a
kitchen cabinet
1. Select preferred duct location (internal blower -
vertical or horizontal, external blower - vertical
only).
2. Begin installation by removing the baffl e fi lters.
3. Reinforce cabinet with 1” x 2” wood strips if
additional strengthening is required. Must be
placed inside frameless cabinets.
4. Temporarily position the range hood in the
desired mounting location. Measure and
mark the mounting holes, duct and electrical
locations with a pencil.
NOTE:
If using an internal blower a 6” round
duct opening is necessary. If using an external
blower an 8” round opening is necessary.
5. Drill/cut out the required openings for duct and
electrical access; make sure the duct opening
is large enough to apply duct tape.
NOTE:
If installing an external blower, cut out a
minimum 1-1/2” opening for the external blower
wires to pass through. Refer to page 8 for
specifi cations.
6. Fasten hood onto cabinet with screws provided.
7. Install
electrical.
8. Install duct work and seal with duct tape.
9. Reinstall baffl e fi lters.
10. Power up hood and check for leaks around duct
tape.
duct/silver
tape
5. Duct
opening
cutout
3. Add 1x2
wood strips
2. Baffle
filters
Installation –
Mounting the Range Hood
Summary of Contents for CACHE CCA-E30ASX Use
Page 2: ...www zephyronline com...
