Key Illustration
Switch on/off (press for 2 seconds to switch off)
UNIT
Convert between weight unit and temperature
Weighing
1.
Strap the webbing belt through the luggage handle, and secure the hook of the belt onto the triangle ring.
2.
Press to switch on the scale before lifting (ensure no stress).
3.
When display shows zero, press
UNIT
to select weight unit.
4.
To re-weigh: press
Z/T
to reset LCD display to zero.
5.
Lift the scale gently. Make sure the scale is horizontal and balanced. LCD shows the weight of luggage.
6.
Wait for weight reading to stop and stabilise, flash 3 times and locked. Scale will display weight reading for 2 minutes and
automatically switch off.
7.
When weight reading is locked, press
Z/T
to reset LCD display to zero and start new weighing. Scale will automatically
switch off if idle for 1 minute.
Room temperature
1. Press to switch on the device, wait until LCD shows zero. Press
UNIT
to view temperature
(in Celsius and Fahrenheit). Press
UNIT
again to revert the normal weighing mode.
2. When converting to temperature display mode, LCD shows “
----
”, meaning the scale is testing temperature and will display
temperature reading in 2 seconds.
To replace battery
LCD will display “Lo” when battery power is low. Replace battery as follows:
1. Hold the scale in one hand. The thumb and index finger of the other hand hold and press on the screw threads of the
battery case and pull out the battery case from the slot.
2. Push corner A outwards to release the used battery.
3. To insert new battery, slide one side of new battery beneath the retainer notch B & C. Press the other side of battery till it
clips underneath the corner A. Ensure to observe the polarity as illustrated in the drawing.
4. Insert the battery case back to the slot on the scale.
removable
battery case
/ slot
hook
triangle ring
webbing belt
Luggage handle
Battery case
corner A
notch C
notch B
