Zentox Photox 500, Operation And Maintenance Manual

Page: 7 / 25

7
C. Place the unit in a dry, out of the way area. Make
sure that there is a minimum of six (6) inches of
clearance around the unit to allow for a proper airflow.
The attached wheels allow for easy maneuverability of
the cabinet.
Insure wheel lock is disengaged prior to moving unit.
D.
Set On/Off switch in the “Off” position.
E. Insert power cord into power receptacle. Insure
there is power to the outlet.
Place cord to avoid trip hazard!
F. Turn the knob on the front of the unit in a clockwise
direction to the HIGH Position. This will turn the unit on
and will turn on the lamps and the fan to its maximum
speed. There should be air movement through the unit.
(The unit has a variable speed fan, which can be used to
reduce the airflow and sound level by turning the Knob in
a clockwise direction.) Airflow can be verified by
detecting a slight breeze at the top of the unit. If not,
turn off unit and make sure there is a power connection.
It is also possible that the unit may have a blown a fuse.
Refer to Section VI, Unscheduled Maintenance, of this
manual for instructions on how to replace the fuse.
CAUTION: Do not place items and /or liquids on top of
unit.
For dry locations only
Pour emplacements secs seulement
CAUTION /
ATTENTION