Zentox Photox 500, Operation And Maintenance Manual

Page: 9 / 25

9
Dust will also accumulate on the surface of the lamps,
thus decreasing effectiveness. It is suggested that the
lamps be checked periodically for particle build-up and
cleaned with a soft, dry cloth.
When handling a UV lamp, wear clean gloves or
wrap a cloth around lamp to avoid oil from
hands getting on surface of lamp. If a lamp
picks up fingerprints or other smudges, wipe off
thoroughly with glass cleaner and a clean cloth
before operating the unit. Failure to keep lamps
clean of fingerprints or smudges will significantly
reduce the life of the UV lamp.
Be sure to record the date and service done on
the Service Record that is located on the inside
of the back cover of this manual.
A. Opening the unit
1. To remove the UV lamps, open lid by removing one
Phillips
™ head screw from the front of the unit (See
Figure 1)
NOTE
NOTE