GB-10
LRT2300
8. Operation
WARNING
• This product is equipped with extremely sharp
blades, and when used improperly these blades
can be extremely dangerous, and improper han-
dling can cause accidents which may in turn lead
to serious injury or death. For this reason, you
should always be careful to follow the following
instructions when using your trimmer.
• Never hold the trimmer in a way in which the blades
are pointed towards someone else.
• Never allow the blades to come into proximity with
your body while the engine of the trimmer is in op-
eration.
• Always be sure to turn off the engine before chang-
ing the angle of the blades, removing branches which
have become stuck in the blades, or at any other
time when coming into close proximity with the
blades.
• Always wear work gloves made of leather or some
other sturdy material when using the trimmer.
• Always place the blade cover provided with the trim-
mer over the blades when not in use.
• Falling branches may fall onto the face or into the
eyes, resulting in injuries, scratches, and cuts,
and for this reason you should always be sure to
wear a helmet and face protector when using your
trimmer.
NOTE
• The thickness of branches which may be cut using
this trimmer is limited to up to approximately 4.8mm.
Never try to cut branches thicker than this, as doing
so may result in damage to the trimmer.
Adjusting the angle of the cutting blades
1. Stop the trimmer engine.
2. Turn the clamp lever counter-clockwise to loosen
it.
3. Adjust the angle of the blades to the desired angle
and then turn the clamp lever clockwise firmly to fix
it.
(1)
(2)
Tighten
Loosen
(1) Clamp lever
(2) Transmission
