background image

GB-14

LRT2300

Limited warranty

Should any failure occur on the product under normal 

operating conditions within the applicable warranty pe-

riod, the failed part will be replaced or repaired free of 

charge by a ZENOAH authorized dealer.

WARRANTY PERIOD:

 Six (6) months after purchased 

by end-user subject to 12 months from produced month. 

(30 days If used for rental purpose)

THE  PURCHASER  SHALL  BEAR  COSTS  OF  TRANS-

PORTING  THE  UNIT  TO  AND  FROM  THE  ZENOAH 

DEALER. 

THE PURCHASER SHALL NOT BE CHARGED FOR DI-

AGNOSTIC LABOR WHICH LEADS TO THE DETERMI-

NATION THAT A WARRANTED PART IS DEFECTIVE, IF 

THE DIAGNOSTIC WORK IS PER FORMED AT THE ZE-

NOAH DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR 

THE  PERFORMANCE  OF  THE  REQUIRED  MAINTE-

NANCE AS DEFINED BY THE MANUFACTURER IN THE 

OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED 

FOR  REPLACEMENT  AS  REQUIRED  MAINTENANCE, 

OR WHICH IS SCHEDULED ONLY FOR REGULAR IN-

SPECTION TO THE EFFECT OF REPAIR OR “REPLACE 

AS  NECESSARY”  SHALL  BE  WARRANTED  FOR  THE 

WARRANTY PERIOD. ANY WARRANTED PART WHICH 

IS  SCHEDULED  FOR  REPLACEMENT  AS  REQUIRED 

MAINTENANCE  SHALL  BE  WARRANTED  FOR  THE 

PERIOD OF TIME UP TO THE FIRST SCHEDULED RE-

PLACEMENT POINT FOR THE PART.

ANY  REPLACEMENT  PART  THAT  IS  EQUIVALENT  IN 

PERFORMANCE  AND  DULABILITY  MAY  BE  USED  IN 

NON-WARRANTY  MAINTENANCE  OR  REPAIRS,  AND 

SHALL  NOT  REDUCE  THE  WARRANTY  OBLIGATION 

OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER 

ENGINE COMPONENTS CAUSED BY THE FAILURE OF 

A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO

 THOSE UNITS 

WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF 

INSTRUCTION  LISTED  IN  THE  OWNER/OPERATOR 

MANUAL FOR PROPER USE AND MAINTENANCE OF 

THE UNITS ACCIDENT MISHANDLING, ALTERATION, 

ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS 

OR ACCESSORIES OTHER THAN THOSE SPECIFIED 

BY THE COMPANY, OR OTHER CAUSES BEYOND THE 

COMPANY’S CONTROL.

THIS WARRANTY DOES NOT COVER

 THOSE PARTS 

REPLACED  BY  NORMAL  WEAR  OR  HARMLESS 

CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

ANY IMPLIED WARRANTY

 is limited to the duration of 

the limited warranty. Otherwise, this limited warranty is 

in lieu of all other expressed or implied warranties, includ-

ing  any  warranty  of 

FITNESS  FOR A  PARTICULAR 

PURPOSE  OR  USE

  and  any  implied  warranty 

MER-

CHANTABILITY

 otherwise applicable to this product.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL 

DAMAGE UNDER ANY AND ALL WARRANTIES ARE 

EXCLUDED.

IF  YOU  NEED  TO  OBTAIN  MORE  INFORMATION, 

PLEASE CALL YOUR NEAREST SERVICE CENTER, OR 

CHECK PLEASE ZENOAH WEB SITE 

http://www.zenoah.net

12. Troubleshooting guide

Case 1. Starting failure 

 

CHECK 

 

PROBABLE CAUSES 

 

ACTION

 

fuel tank 

  incorrect fuel 

  drain it and use correct fuel

 

fuel filter 

  fuel filter is clogged 

  clean

 

carburetor adjustment screw 

  out of normal range 

  adjust to normal range

 

sparking (no spark) 

  spark plug is fouled/wet 

  clean/dry

 

 

  plug gap is incorrect 

  correct (GAP: 0.6 - 0.7 mm)

 

spark plug 

  disconnected 

  retighten

Case 2. Engine starts but does not keep running/hard re-starting

 

CHECK 

 

PROBABLE CAUSES 

 

ACTION

 

fuel tank 

  incorrect fuel or staled fuel 

  drain it and use correct fuel

 

carburetor adjustment screw 

  out of normal range 

  adjust to normal range

 

muffler, cylinder (exhaust port) 

  carbon is built-up 

  consult with the repair specialty store

 

air cleaner 

  clogged with dust 

  air blow or wash

 

cylinder fin, fan cover 

  clogged with dust 

  consult with the repair specialty store

When your unit seems to need further service, please consult with our ZENOAH service shop in your area. 

Summary of Contents for LRT2300















Reviews: