7
3. Special Tools
Handheld Blower: HB23 Series, HBZ26 Series
6. Remove the rotor using the puller assy.
Apply 8 mm puller bolts.
How to use (Procedure)
Backpack Blower: EBZ30 Series
1. Remove the plug, and detach the main complete
parts. Remove the carburetor, recoil starter and
fuel tank if necessary.
Rotor
Puller Assy
Puller Bolt (8 mm)
17 mm
【
【【
【
Disassembly Flowchart
】
】】
】
Air Inlet Net
↓
Spring Damper
↓
Frame
↓
Volute Cover Assy
↓
Engine Cover
↓
Below the procedure
Volute Cover Assy.
Mounting Screw (8)
TORX (T27): M5
×
L25
Mounting Screw (3)
Mounting Bolt (1)
(+): M5
×
L16
Mounting Screw (3)
TORX (T27): M5
×
25
Engine Cover
Engine Short Block
Volute Case
Air Inlet Net
Plate
Clip (4)
Frame
Mounting Nut (2)
M6
Mounting Screw (2)
TORX (T27/ P): M5
×
L70
Mounting Nut (2)
M5
Lower Damper
Refer to
“4-2 Air Inlet Net Removal
”
Refer to
“4-3 Upper Spring Damper Removal”
Refer to
“4-4 Volute Cover Lower Damper Removal”
Construction
