Zenoah GZ4350, Workshop Manual

Page: 39 / 62

English -
38
Repair Instructions
4. Assemble needle valve M with lever arm Q,
shaft L and spring R, and tighten screw P.
See figure 40.
7. Fit gasket K, the control membrane J and the
pump cover H. See figure 42.
8. Carry out a pressure test. See “Pressure testing
the carburettor”.
Fig 41
Fig 42
Fig 40
5. Check using a ruler or the like that the lever is
level with the assembly plane on the cover.
If necessary, the lever arm can be bent, see
figure 41.