Zenoah GZ4350, Workshop Manual

Page: 23 / 62

English -
22
6.10 Assembling the throttle trigger
lockout, throttle trigger and spring
1
Lubricate the pin and joined surfaces with a light
oil. Slide in the throttle control and make sure the
spring is fitted as outlined in figure 20.
Safety equipment
Fig 20
Fig 21
Fig 22
2
Fit the throttle rod on the throttle trigger. Fit the
throttle trigger’s pin using a punch.
See figure 21.
3
Fit the throttle trigger lockout by sliding it on the
shaft in the rear handle. See figure 22.
Place the spring according to figure 23.
4
Fit the handle cover and fasten the screw.
Tightning torque 2,5- 3,9 Nm. See figure 16.
Fig 23